IP Camera User Manual
3.5.9 Alarm Configure
3.5.9.1 Motion Detection
The interface of motion detection configure is shown in Fig 3-17:
Fig 3-17
[Sensitivity]: Set the sensitivity of motion detection: low, normal, high; the higher grade
means higher sensitivity.
[Detection Time Interval]: The time interval between two adjacent detective motions,
range from 5 to 10s. If there is other motion detected during this period, it will be
considered continuous movement; otherwise should be regarded as two different motion
events.
[Set Motion Area]: Click this button to enter the detection region window. Click and drag
cursor to set the area of motion detection. An image can be entirely or partially set, it
26