Date / Time Setting - Digisol DG-SC2100 User Manual

2.8.2 Date / Time Setting

This setting allows you to change the date and time of the clock in the IP camera. You
can set the time manually, or use network time protocol (NTP) to set the time
automatically.
The settings in this menu are described below:
Item
Set Date/Time
manually
Time Zone
NTP Server
Enable Daylight
Saving Time
Synchronize to PC
time
Click 'Apply' to save settings and make the new settings take effect.
DG-SC2100/DG-SC2100W User Manual
Please input the date and time you wish to set here.
Date / time format is YYYY / MM / DD HH:MM:SS
Time is in 24-hour format.
You can click 'Synchronize to PC time' to use the time of the
computer you're using.
Example: 24th August 2007 = 2007/ 08 / 24, and
PM 9:24:30 = 21:24:30
Please select the time zone of the country / city from the
dropdown menu.
Please input the IP address or host name of NTP server here.
You can use default value 'pool.ntp.org', or ask your ISP for the
IP address or host name, if they have one.
Select 'Yes' if your area of residence uses daylight saving; if
not, select 'No'.
Click this button and the IP camera will use the current time
setting of your computer as IP camera's time setting.
57
Description