Power Assist System - Otto Bock e-support Instructions For Use Manual

1. Power Assist System

The E-Support has three modes: "manual travel", "stand-by", and "power assisted travel". Modes are switched
using the power switch and the push rings. The Power Assist System also includes a function which stops the
assisted power when the wheelchair is not operated using the push rings with the power switch on. Please refer to
the following chart for an overview of the Power Assist System.
Manual travel
Power off
Stop function off
Power
switch off
Auto-power off condition
6
Power
switch on
Power on
Power assist off
Power
switch off
Stop function on
push ring
operation for 5 con-
secutive
minutes
Power off
Stop function on
Stand by
Push ring
operation
Stop condition
maintained for
10 seconds
Without
It's
heavy!?
Power assisted
travel
Power on
Power assist on