Headrest; Power Seat Functions; Safety Instructions - Otto Bock C2000 Instructions For Use Manual

Use
25
26

8.10.5 Headrest

The head support or head/neckrest stabilises and guides the user's head. It has been mounted to the mounting kit
for head/neckrests by qualified personnel.
Detailed information regarding use, maintenance and repair can be found in the included instructions for use.

8.11 Power seat functions

The power wheelchair can be equipped with a range of different optional power seat functions.
For more information on the specific equipment of this power wheelchair, contact the qualified personnel.

8.11.1 Safety instructions

WARNING
Driving with power seat functions
Falling, tipping over due to driving with unallowable seat settings
► Only drive in road traffic and on inclines and downgrades with the seat tilt and seat height adjustments
lowered and with a vertical backrest. Always use a belt system.
► Slightly tilt the seat to the rear when driving down obstacles in a forward direction (e.g. curbs) and reduce the
speed.
► Drive with the seat raised or with the seat tilt/back angle adjustment activated only for short distances at
home. Always use the speed level 1 for this. Note that the field of vision is limited when driving. Always use a
belt system.
► Use the seat height adjustment and the seat tilt only on firm, level ground.
► To avoid uncontrolled driving movements, ensure that the control unit is always in "Power seat functions"
mode before using the power seat functions.
► To avoid hazardous situations, note the correct deflection direction of the joystick (see Page 44).
40
Folding down the back support (reducing the
transport size)
1) Pull the release lever up (see fig. 25, item 1).
2) Fold the back support forward or back (see fig. 25,
item 2).
3) Let go of the release lever.
Remove the headrest
Two persons are required to remove the headrest.
1) 1st person: Find the release points on the Recaro®
seat below the cover and push on them both at the
same time.
2) 2nd person: Pull the headrest up and remove.
C2000