When The Battery Is Installed In The Charger - Otto Bock e-support Instructions For Use Manual

2. When the Battery is Installed in the Charger

2.1 During Fast Charging
• When charging starts, the capacity lamps are activated automatically and indicate the progress of charging.
• When charging is ended, the capacity lamps go off automatically.
Battery capacity lamp
indication
●
● ●
2.2 During Refresh Charging
• When refresh discharging starts, the capacity lamps go off one by one to indicate the remaining battery capacity,
just like when the battery is mounted in the E-Support.
• When refresh discharging is ended, charging is started automatically and the capacity lamps display the mode of
fast charging.
Battery capacity lamp
indication
●
● ●
● ● ●
● ● ●
Charger indication
(reference)
●
❍ ❍
●
●
●
●
●
❍ ❍
●
●
●
Charger indication
(reference)
●
❍ ❍
●
●
❍ ❍
Meaning of indication
The lighting up of a lamp indicates that the level
has reached its charging capacity. The blinking
of a lamp indicates that charging to that
capacity level is in progress.
Charging to the full-capacity level is in
progress. Charging will be completed in a while.
Meaning of indication
The blinking capacity lamp indicates the level
where refresh discharging is in progress.
Refresh discharging will end soon and the
charger switches to charging. It will take
approximately 4 to 6 hours for completion of
charging.
25