Otto Bock e-support Instructions For Use Manual page 65

32
2.2 All other Types of Side Panels
Mount the adapter plate to the inside of the wheelchair. For each rear wheel,
screw one spacer into the threaded bore shown in figure 3.
Position the fitting in a way that is protrudes maximally from the adapter
plate. The Nordlock washers are placed between the outer surface of the
adapter plate and the counternut.
4
2.3 Control
1) Check the position of the "E-Support" rear wheels in relation to the side
panels! Is the position of the fittings correct?
2) Are the spacers mounted to the correct threaded bore?
Note:
When in correct position, the spacers point centrically toward the wheelchair
frame (see figure 5).
5
Spacer
on the frame