Christie Roadster S+12K User Manual page 97

Working with PIP 
Roadster & Mirage S+/HD User Manual
020-100002-04 Rev. 1 (12-2008)
NOTE: To control the primary image, access all picture controls through the Main
menu. To control the secondary (PIP) image, access picture controls through the
Picture-in-Picture and Switching menu.
Use the first of six
options in the PIP
and Switching
menu to enable and
Picture
define how you
Picture
want to use PIP.
Options
Swap Main and
PIP Image
Toggle the current picture-in-picture relationship so that the primary (main) image
becomes secondary (PIP), and the secondary image becomes primary. Swapping is
available only when PIP is enabled.
NOTE: There may be a slight delay when swapping the Primary and Secondary
images.
PIP Enable
(Short cut: Press
the Remote) if menu not
present.
Toggle to display from two
sources at once (Picture-in-
Picture) or the primary
source only. This checkbox
turns the secondary source
on and off.
NOTE: Disable PIP and Best Switching for Interlaced sources > 35kHz.
PIP Size and Position –
Most controls in the PIP Size and
Position menu adjust the PIP
(secondary) image in the same
fashion as their counterparts in the
main Size and Position menu
adjust the main image—see 3.6,
Adjusting the Image for details.
Exceptions are:
–Set the
POSITION PRESETS
location of the PIP (secondary)
image in the display.
PIP and Switching
1.
Swap Main and PIP Image
2.
3.
PIP Size & Position
-in-
4. PIP Image Settings
5.
PIP Border Width
6.
PIP Border Color
7.
Image Optimization
8.
9.
Numbers Select Main Image
on
SUBMENU
PIP Enable
4
Red
Fade Time
PIP Only
Operation
Switching
Options
(n/a)
3-55