Christie Roadster S+12K User Manual page 8

Introduction
Main Features 
1-2
General
•
DLP™ three-chip electronics with true 1400 x 1050 (SXGA+) and 1920 x
1080 (HD) native resolution
•
Ten-bit digital video processing
•
Single-lens design with field-interchangeable, fast-change lens – no tools needed
•
Modular design for easy servicing
•
Intelligent Lens System (ILS
•
Built-in handles and multiple rigging points
•
Choice of lenses (from 0.67:1 up to 10.4:1, SXGA+ or HD), all zoom lenses
motorized
Lamps / Light Output
•
Brightness (ANSI lumens)
•
Roadster S+12K/HD12K or Mirage HD12 = 12000
•
Roadster S+16K or Mirage S+ 14K = 16000
•
Roadster HD18K or Mirage HD18 = 18000
•
Roadster S+20K = 20000
•
Contrast Ratio (ANSI lumens)
•
450:1 ANSI
•
1600-2000:1 Full Field
•
LiteLOC™ for automatic constant-brightness control
•
Quick change bubble-style lamp module
Inputs
There are two different types of Input face plates configurations (model dependant).
See Figure 1.1 & 1.2. These configurations may include the following inputs:
•
One analog RGBHV/YPbPr input with five BNCs
•
One DVI-I input for either digital RGB/YCrCb or analog RGB/YPbPr
signals
•
One analog composite-video input
•
One analog S-video input
•
Built-in multi-standard video decoder (NTSC, NTSC 4.43, PAL, PAL-M,
PAL-N, PAL-60 AND SECAM)
•
One Dual SD/HD-SDI module (standard on Roadster models only)
•
Compatible with all currently used HDTV formats
For simplicity, this manual refers to the configuration in Figure 1.1 only.
™
) to save and restore lens settings
Roadster & Mirage S+/HD User Manual
020-100002-04 Rev. 1 (12-2008)