Christie Roadster S+12K User Manual page 47

IR Remote 
Roadster & Mirage S+/HD User Manual
020-100002-04 Rev. 1 (12-2008)
An IR remote keypad controls the projector by way of wireless communications from
a battery-powered infrared (IR) transmitter. Use the IR remote keypad the same way
you would use a remote keypad supplied with a TV or VCR. When making key
presses, direct the keypad either toward the screen or toward the front or rear IR
sensors on the projector.
NOTE: For improved reception, use an optional remote IR sensor to route the signal
via a phone cable plugged into the wired keypad port.
The "brick" style rental staging IR remote, typically used with Roadster models, is
shown in Figure 3.4. It has no laser pointer, but includes three additional keys: the
Figure 3.3. Remote Keypad
Operation
- Press OSD
to turn Off
3-5