Christie Roadster S+12K User Manual page 124

Maintenance
Lamp Replacement
Procedure
4-6
Table 4.2. Lamp and Filter Kits
Projector Model
Roadster S+12K (38-DSP210-xx)
Roadster HD12K (104-010101-xx)
Mirage HD12 (104-027101-xx)
Roadster S+16K (38-DSP214-xx)
Mirage S+14K (38-DSP214-xx)
Mirage HD18 (104-022101-xx)
Roadster HD18K (104-021101-xx)
Roadster S+20K (104-001101-xx)
A bubble lamp permanently mounted inside its own protective assembly provides the
high brightness of your projector. Using this module beyond its warranted life is not
recommended—changes in the quartz of the bulb can lead to reliability problems,
poor performance or sudden lamp expiry. The filter should always be changed when
the lamp is replaced, or sooner in dusty environments.
The lamp module is calibrated for maximum performance and brightness in this
projector. Do not attempt to re-align or adjust the lamp module.
How old is the lamp?
The number of hours logged on the current lamp appears both in the Lamp menu and
the Status menu. In the Status menu, do not confuse "Lamp Hours" with "Lamp
Counter" which indicates the number of hours logged during the current rental period
only and is normally used for rental projectors only.
NOTE: As the lamp nears its limit (as set in Lamp Limit), a message can appear on
screen to warn that the lamp needs to be replaced. The LED's next to the built-in
keypad will flash "LP" when lamp time has expired. To ensure this warning
appears, enter a checkmark in the Lamp Message checkbox located in the Lamp
submenu.

A Phillips #2 screwdriver is required. All access panels' screws are ¼-turn
TOOLS:
to lock/unlock.
Warnings
A qualified service technician must perform lamp replacement.
Cool the lamp completely and handle by the housing only.
Install the correct wattage lamp supplied by Christie (see above) and read the
Lamp Replacement procedure in its entirety before proceeding.
Do not touch the glass surface of the lamp. Fingerprints left on the surface can
lead to an intense accumulation of heat called a "hotspot", which could
potentially result in the lamp shattering. It is recommended you wear clean,
lint-free gloves and a face shield when working with the lamp.
Lamp Type Lamp/Filter Kit Required
(Watts)
2.0 kW
2.4 kW
3.0 kW
Roadster & Mirage S+/HD User Manual
03-900519-51P
003-120135-xx
003-120135-xx
03-900518-51P
03-900518-51P
003-000306-xx
003-000306-xx
003-000306-xx
020-100002-04 Rev. 1 (12-2008)