Christie Roadster S+12K User Manual page 68

Operation
Image Settings Menu 
3-26
PIP Advanced Size & Position
Active Input Window 1600x1200
1. Top Blank 0
2. Bottom Blank 0
3. Left Blank 0
4. Right Blank 0
5. Plug & Display <EDID> Native Resolution 60Hz
Figure 3.15. Blanking of a PIP Image
PLUG & DISPLAY (EDID):
<EDID> source outputs a signal according to the
EDID information provided by the projector. To
override this information and display in a different
format (for example, if your Plug & Play [EDID]
device does not support the projector's resolution
and/or frequency), select the desired Plug & Play
<EDID> resolution from the list.
Any daisy-chained projectors will also display
according to the chosen Plug & Play <EDID>
format.
EDID = Extended Display Identification Data standard.
Use options in the Image Settings
menu to alter your main image
without affecting its size or
position. Changes made to the
Image Settings menu are applied
immediately and are saved when
you exit the menu (press
). Options not available for
Menu
the projector model or source are
disabled and appear dim (gray).
Contrast
( Press
SHORT CUT:
Contra st
"Contrast" increases or decreases the perceived difference between light and dark
areas of the image (0-100). For best results, keep close to 50. If the contrast is set too
high, the light parts of the image lose detail and clarity. If the contrast is set too low,
the light areas will not be as bright as they could be and the overall image will be
dim. For best results, start with a low value and increase so that whites remain bright
but are not distorted or tinted, and that light areas do not become white (i.e., are
"crushed").
NOTE: If the environment lighting changes, an adjustment of Gamma is
recommended (see below).
By default, a Plug & Play
or
Exit
and adjust the slidebar.)
PIP Advanced Size & Position
Active Input Window 1600x1200
1. Top Blank 49
2. Bottom Blank 2
3. Left Blank 485
4. Right Blank 67
5. Plug & Display <EDID> Native Resolution 60Hz
Native Resolution 60 Hz
1 4 0 0 x 1 0 5 0 6 0 H z
720p (1280x720 60Hz)
DC2K (2048x720 60Hz)
1024x768x116Hz 3D
1280x1024x110Hz 3D
1400x1050x102Hz 3D
1080p 60Hz / 1080i 60Hz
1080p 50Hz / 1080i 50Hz
1080p 24Hz / 1080i 30Hz
Roadster & Mirage S+/HD User Manual
020-100002-04 Rev. 1 (12-2008)