Installation & Setup
2-4
The handles can not support more than ONE projector.
Do not use handles for extended time periods.
Do not use the handles as safety points, or as points from which
Hoisting
Four integral rigging points on the top of the projector (Figure 2.5) and eight on the
bottom (Figure 2.6) enable either upright or inverted hoisting. For either orientation,
hoist an individual projector, or up to three projectors in a stack.
RULES FOR ALL HOISTING:
•
Use at least four rigging points for hoisting
up to three projectors.
•
Connect safety cables, and rigging
equipment to the designated locations on
the projector.
•
Use hoisting and rigging equipment
suitable to your application such as clamps,
cables, eyebolts, or straps, and which
accommodate the load rating. All integral,
metric hardware on the projector accepts
an M12 thread only.
•
Never hoist a projector by its feet, handles,
or any other component (Figure 2.7).
WARNINGS
to suspend or hoist the projector.
Figure 2.5. Top Rigging Points
Figure 2.6. Bottom Rigging
Points
Roadster & Mirage S+/HD User Manual
020-100002-04 Rev. 1 (12-2008)