Christie Roadster S+12K User Manual page 61

Copying or 
Deleting Channels
Roadster & Mirage S+/HD User Manual
020-100002-04 Rev. 1 (12-2008)
Either channel list, whether the
SIGNAL TYPE —
menu, identifies signal types in a shortened form as defined below. These descriptors
indicate what signal information the projector uses to identify a match for a given
channel, and are preceded by either an "i" (interlaced signals) or "p" (progressive
signal"). See Table 3.2.
Table 3.2. Abbreviations for Signal Type
Abbrev.
4WH
4WV
SG
5W
5WR
SVid
CVid
Dig
FUNCTIONS WITHIN THE CHANNEL SETUP MENU —
highlight the desired channel in the Channel Setup menu and do one of two things:
•
Press if you want to copy the selected channel or delete this or other
Func
channels. See Copying or Deleting a Channel below.
•
Press if you want to edit channel setups (i.e., non-image related parameters)
Enter
for the selected channel. See Editing a Channel Setup, below.
, highlight the desired channel in the Channel Setup menu, then
TO COPY A CHANNEL
press to go to the Channel Copy/Delete submenu. Select "Copy" and press
Func
—a new channel will be created. It is identical to original, which still remains,
Enter
but it is identified with the next available number from 01-50 (Figure 3.11). If you
change your mind and do not want to copy the current channel, press
and return to the previous menu. Copying channels is a quick method for creating
numerous channels, each of which can then be edited and adjusted for a variety of
presentations in the future.
TO DELETE A CHANNEL
then press to activate the Channel Copy/Delete submenu. Select "Delete" and
Func
press —a confirmation window will appear to confirm that you want to delete
Enter
this channel. See Figure 3.12.
Signal Type
Composite (4 wire) on HC input
Composite (4 wire) on V input
Sync-on-green
Separate H,V
Separate H,V swapped
S-Video
Composite Video
Digital
Figure 3.11. Copying a Channel
, highlight the desired channel in the Channel Setup menu,
key list or the Channel Setup
Chan
To copy, delete or edit a channel,
Exit
Operation
to cancel
3-19