Christie Roadster S+12K User Manual page 15

Hoisting Procedure 
STEP 1 
STEP 2 
Roadster & Mirage S+/HD User Manual
020-100002-04 Rev. 1 (12-2008)
Remove the lens before hoisting a projector.
Figure 2.7. NEVER Use Handles for Hoisting or as Safety Points
This procedure applies to one or more projectors. To hoist a stack, first stack two or
three projectors according to the stacking procedure included in this manual. Never
stack or hoist more than three projectors together.
Remove lens (recommended)
Remove the projection lens to prevent possible damage during hoisting. See 4.4,
Replacing the Lamp and Filter.
Retract feet
If the projector is inverted, retract the adjustable feet to prevent the hoisting hardware
from getting caught.
WARNING
Use metric hardware only.
Never force incompatible threads.
IMPORTANT
WARNING
Never hoist a projector by its feet,
handles, or any other component.
Installation & Setup
2-5