Composite -Video
Input Module
38-804608-xx
PC250 Analog
Input Module
38-804609-xx
DVI Input Module
38-804635-xx
Roadster & Mirage S+/HD User Manual
020-100002-04 Rev. 1 (12-2008)
The Composite Video Input Module receives either composite video input signals
from tape or disk players. Video inputs are 75
provided for buffered loop-through to another display device.
NOTES: 1) The S-video portion of this module is non-functional with this projector.
Connect composite video signals only. 2) This module is not a decoder.
Composite Video Features
•
BNC connectors for composite RGB signals
•
4-pin mini-DIN connectors for S-Video signals
•
Buffered loop-through video outputs
The PC250 Analog Input Module receives analog RGB input signals from IBM PC
compatibles or Macintosh computers. Video inputs are 75
outputs are provided for buffered loop-through to another display device.
PC250 Analog Features
•
Accepts VGA or MAC RGB video
•
15 pin D connectors for video
•
Active loop-through video outputs
NOTES: This interface does not accept VGA and MAC signals simultaneously.
The DVI Input Module can be installed to display digital video input signals
conforming to the DVI (Digital Visual Interface) single-channel standard.
Optional Input Modules
terminated. Video outputs are
S
(NOTE: non-functional)
terminated. Video
S
F-3