Christie Roadster S+12K User Manual page 48

Operation
Wired Remote 
Guide to Keypads 
3-6
Swap key for use with PIP functions, Backlight key for lighting keys, and direct Input
key used with the numbered keypad to switch from one input to another.
the shutter
Use to
Press OSD to turn Off
Figure 3.4. "Brick" Rental Staging Remote Keypad (Roadster)
With the addition of a cable (supplied), the IR remote converts into a wired remote
keypad. Simply connect to the
remote is recommended when the rear built-in keypad is inaccessible or if lighting
conditions are interfering with IR transmission.
NOTE: Batteries must remain in the remote to use the laser feature.
1) Press keys one-at-a-time; there are no simultaneous key combinations required.
input at the rear of the projector. The wired
REMOTE
Roadster & Mirage S+/HD User Manual
020-100002-04 Rev. 1 (12-2008)