Christie Roadster S+12K User Manual page 82

Operation
3.7 Adjusting
System
Parameters and
Advanced
Controls
System Configuration 
— GENERAL —
3-40
menu. This checkbox must be set by the user for all new 3D sources, and cleared for
all new non-3D sources (default setting is checked). Once set, this value will be
maintained for that source for all future uses. This option is also available under the
Simulation 3D menu in Mirage HD projectors only.
This allows the signals connected to inputs 1, 3, and 4 to have
FLOATING INPUTS -
floating ground references relative to the projector. Floating the inputs can remove
hum bars in the image if the installation has conflicting grounds. However, floating
the inputs can also introduce hum bars when the signal ground is the only connecting
ground. Select the setting that produces the best image.
Use the Configuration menu to
define general operating
parameters and communications
with other projectors and
equipment, and to access other
advanced processing and image
adjustments affecting overall
performance. In addition, the
Configuration menu provides
access to diagnostics, calibration
tools and the Service submenu
(password-protected).
Keep in mind that settings in the
Configuration menu (and its submenus) are typically "global" settings applied
regardless of the type of source being used. This characteristic is identified with the
(globe) icon alongside the option.
NOTE: The Configuration menu is recommended for experienced users/technicians
only.
The first six options in the Configuration menu are explained below:
Language
Choose from available languages to use in the projector's menus. The change will
take effect immediately.
Image Orientation
Set the orientation of the image according to the orientation of your projector. If the
setting is incorrect, projected images will be reversed and/or upside down.
Reserved - No function.
Auto Power-up
Enter a checkmark to enable the projector to automatically power up after losing
power due to a power failure or due to unplugging the projector during operation.
Note that unsaved display adjustments may be lost.
Configuration
1. Language
2. Image Orientation
3. Reserved
4. Auto Power Up
5. Set Date And Time
6. Menu Preferences
7.
Communications
8. Geometry and Color
9. Diagnostics and Calibration
0.
Service
Option 1 Card: Dual SD/HD-SDI
Option Card 2 Empty
Roadster & Mirage S+/HD User Manual
English
Front
020-100002-04 Rev. 1 (12-2008)