Installation Considerations - Christie Roadster S+12K User Manual

STEP 7 
Step 8 
2.2 Installation
Considerations
Lifting, Hoisting, 
and Stacking
Roadster & Mirage S+/HD User Manual
020-100002-04 Rev. 1 (12-2008)
Lens Adjustments
: With the input image displayed:
•
ZOOM
•
If remote keypad: Press Zoom
•
If built-in keypad: Press Zoom
Hold the key down to see the effect – arrows in the display indicate
the direction of the zoom (Figure 2.2).
•
FOCUS: With the input image displayed:
•
If remote keypad: Press Focus
•
If built-in keypad: Press Focus
Hold the key down to see the effect – arrows in the display indicate
the direction of the focus (Figure 2.3).
•
LENS OFFSET: To move the image:
•
If remote keypad: Press either Lens H
(Figure 2.4).
•
If built-in keypad: Press
Image Adjustments
Press or (remote) to access display parameters described in Section 3.
Menu
Although this projector delivers a high-brightness, high-quality output, the final
display quality could be compromised if the projector is not properly installed. This
subsection discusses issues you should consider before proceeding with a final
installation. Even if you do not intend to use the projectors in a fixed and permanent
installation, the following information will help you to better understand what you
can do to enhance display performance.
For any new installation, you will likely have to safely lift or hoist the projector into
place. Keep in mind the following guidelines for safety.
Lifting
All models include handles for convenient hand transport only, such as when a
projector is lifted from a shipping container to a table. Note the following:
•
The handles are intended to support the weight of one projector only.
•
The handles are intended to support a projector for a brief time only.
•
The handles are not safety points, nor points from which to hoist or suspend the
projector.
.
or
.
or
.
or
or .
or Lens V
and use the arrow keys.
Lens
Shif t
Installation & Setup
Figure
2.2
Figure
2.3
Figure 2.4
2-3