Christie Roadster S+12K User Manual page 56

Christie roadster s+12k; roadster hd12k; roadster s+16k; roadster hd18k; roadster s+20k; mirage hd12; mirage s+14k; mirage hd18 data/video projector
Hide thumbs Also See for Roadster S+12K:
Table of Contents

Advertisement

Operation
3-14
For "blind" access, hide the entire menu system (see OSD key, above) and/or
direct slidebars activated by their own key (such as Contrast, Brightness, etc.).
Control by using the proper key press or numerical sequence of key presses.
When using PIP images, use
Once selected, change the settings as desired (see below). Changes take effect
immediately and are saved upon exit from all menus, or after 15 minutes.
The current value for a given
Slidebars in menus –
parameter, such as size or vertical stretch, appears to the left of
its slidebar icon (adjustment window). This number often expresses a percentage, or
it may have units associated with it (such as pixels, degrees Kelvin, etc.), depending
on the specific option. Press
both the number and the length of the bar change accordingly. Hold for continuous
adjustment. Or press
the keypad and then press
For quick access, you access Gamma, Brightness, and Contrast
"Direct" slidebars -
slidebars without traveling the menu system. For example, simply press
immediately display the same contrast slidebar accessed with the
the Image Settings menu.
Use the arrow keys to adjust a direct slidebar, or press
number from the keypad, then
you are done, press
Exit
NOTES: 1) You can still adjust a direct slidebar as usual if the display is turned off
or Menu Preferences menu) — the slidebar just won't be visible. 2) A
(see
OSD
direct slidebar disappears if it is not used within 5 seconds.
Checkboxes -
Conditions are present if its adjacent checkbox contains a checkmark.
To toggle the checkbox, simply highlight and press
check and
to uncheck. If a checkbox is numbered, simply enter its number to
immediately toggle the checkbox.
Pull-down lists –
To see a pull-down list of options available for a given parameter
labeled with a
, you can:
Highlight it and press
Or enter the menu option number.
Use
or
keys to navigate up and down within the list (the current choice is
noted with a small
). Press
3.8).
key to adjust the image.
to gradually adjust the setting up or down—
to activate a slidebar text box for specific number entry via
to save (or press
or
or
to return to your presentation.
(Enter)
to choose an option from the list, if desired (Figure
to cancel).
Exit
Cont
Contrast
and enter a specific
to save (or
to cancel). When
Exit
, or highlight and use
Roadster & Mirage S+/HD User Manual
020-100002-04 Rev. 1 (12-2008)
to
option in
to

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents