Replacing The Lens - Christie Roadster S+12K User Manual

4.5 Replacing the
Projection Lens
STEP 1
STEP 2
Roadster & Mirage S+/HD User Manual
020-100002-04 Rev. 1 (12-2008)
A variety of lenses can accommodate different throw distances and specific types of
installations. See page 6-1 for details. To change a lens, follow the steps below.

Turn off the projector, cool and unplug
NOTE: If necessary, a lens can be swapped out while the projector is running, but
this can result in dust being drawn into the projector. Avoid if possible.
Before removing or installing any lens, turn off the projector and allow the fans to
cool the lamp before unplugging the projector. Ensure that the lens cap is on.

Install the lens cap and press the lens release button
See Figure 4.9.
WARNING
Unplug the projector.
Figure 4.9. Depressing Lens Release
Maintenance
4-11