Adjusting The Image - Christie Roadster S+12K User Manual

3.6 Adjusting the
Image
Roadster & Mirage S+/HD User Manual
020-100002-04 Rev. 1 (12-2008)
•
1-8, corresponding to where on the projector's input panel the source is
INPUT:
connected.
•
If checked (default, except for automatically defined channels with
IN MENU:
unchanged parameters), this defined channel will then appear in the list available
key is pressed. If unchecked, the channel must be accessed via the
when
Chan
channel setup menu
NOTE: On-screen display of the channel list is an option that must be set in the
Menu Preferences menu.
•
If checked, (default), the projector can automatically locate this
AUTO SOURCE:
channel when an incoming input signal matches. If not checked, the projector can
locate the selected channel only when it is directly selected via
keypad—and a change in input signal will not result in a channel change.
•
If checked, all of the image settings for this channel are disabled. If
LOCKED:
unchecked (default), all available image settings can be adjusted as desired. You
cannot use Auto Setup with a locked channel.
•
PREVIOUS CHANNEL:
for the previous channel in the Channel Setup list.
•
Select this option to see or change Channel Edit settings for the
NEXT CHANNEL:
next channel in the Channel Setup list.
The most commonly used options for image adjustments are accessed through two
menus: Size and Position (
appear in the Main menu. From either of these two menus, you can change settings
affecting the image from the current channel by working with the appropriate
slidebars, checkboxes and pull-down lists.
the presentation, if from the Main menu) and accept any changes you may have
entered. Settings are saved with the current channel.
From your presentation, you can access any of the individual options in these menus
by pressing followed by the appropriate two-digit number representing their
Menu
location in the menu system. For example, press
"Gamma" option in the Image Settings menu.
Note that for certain options, you may prefer to use a "direct key" from presentation
level to go directly to a particular option without traveling through the menu system
(available for certain display parameters only). For example, press
"contrast" slidebar immediately. Press
NOTES: 1) To hide these "direct" slidebars, disable the" Display Slidebars"
checkbox in the Menu Preferences menu. 2) To hide the entire menu system from
view, turn off the on-screen display by pressing
on the keypad or via the Auto Source function.
Menu
Select this option to see or change Channel Edit settings
) and Image Settings (
Menu
will return to the previous menu (or to
Exit
to return to your presentation.
Exit
on the
Chan
), both of which
Menu
to quickly access the
2 3
Menu
to access the
Cont
.
OS D
Operation
3-21