Lexicon RV-8 User Manual page 51

RV-8
TUNER SETUP
SETUP TUNER SETUP
Opens the TUNER SETUP menu, which is used to configure the AM/
FM tuner. See "TUNER SETUP" on page 3-72 for more information.
LOCK OPTIONS
SETUP LOCK OPTIONS
Opens the LOCK OPTIONS menu, which is used to protect MODE
ADJUST, AUDIO CONTROLS and SETUP menu branch settings from
accidental changes. For more information, see "Lock Options" on
page 3-79.
LIVE! CALIBRATION
SETUP LIVE! CALIBRATION
Opens the LIVE! CALIBRATION menu, which is used to perform the
necessary calibration before using the LIVE! modes. See "LIVE!
CALIBRATION" on page 3-80 for more information.
POWER MANAGEMENT
SETUP POWER MANAGEMENT
Opens the POWER MANAGEMENT menu, which is used to automat-
ically put the RV-8 into standby mode during brownouts.
When set to ON, the RV-8 detects low voltage levels or a momentary
loss of power and puts the device in standby mode. In the event of a
power brown out, the RV-8 will display a BROWN OUT!! PRESS
STANDBY message. To turn the unit back on, use the front panel
STANDYBY button.
When set to OFF, the RV-8 will attempt to function during a
momentary power loss, however software settings may become
corrupt and need to be reset.
When the RV-8 is in standby mode, pressing the button turns the
unit on and activates all zones that were active in the previous
operating session.
Setup
ON, OFF
3-3