Lexicon RV-8 User Manual page 136

Audio Controls
AUDIO CONTROLS
(continued)
MAIN MENU AUDIO CONTROLS
BASS
MODE ADJUST
TREBLE
AUDIO CONTROLS
TILT EQ
TUNER PRESETS
LOUDNESS
SETUP
BALANCE
FADER
ZONE2 BALANCE
ZONE3 BALANCE
TILT EQ
TILT EQ
AUDIO CONTROLS
Controls the amount of tilt equalization applied to the Main Zone
audio output connectors labeled Front L/R, Center and Sub. This
parameter setting affects the entire frequency spectrum with a
hinge point at 1kHz. As the setting increases, frequencies higher
than 1kHz are boosted while frequencies lower than 1kHz are
simultaneously cut. As the setting decreases, frequencies higher
than 1kHz are cut while frequencies lower than 1kHz are
simultaneously boosted. The TILT EQ Parameter Settings graph on
the next page indicates the frequency response of all TILT EQ
parameter settings.
4-4
MAIN MENU
-3.0 to +3.0dB
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
LOUDNESS
–3.0dB to +3.0dB
AUDIO CONTROLS
Controls the amount of low-frequency boost that is automatically
applied to the Main Zone audio output connectors labeled Front L/R,
Center and Sub. When ON is selected, loudness compensation is
automatically applied, based on volume level. As volume level
increases, the amount of boost automatically decreases. The loudness
contour is optimized for input sources calibrated to THX reference
levels. When OFF is selected, no loudness compensation is applied.
The LOUDNESS Parameter Settings graph on the next page
indicates the frequency response that is automatically applied when
the LOUDNESS parameter is set to ON and Main Zone volume level
is adjusted.
AUDIO CONTROLS
BASS
TREBLE
TILT EQ
LOUDNESS
BALANCE
FADER
ZONE2 BALANCE
ZONE3 BALANCE
LOUDNESS
Lexicon
ON
OFF
ON, OFF