Lexicon RV-8 User Manual page 175

RV-8
5.1a 2-CHANNEL
MODE ADJUST 5.1a 2-CHANNEL
This mode downmixes 5.1-channel analog input signals into
2-channel LOGIC7-encoded output signals. It sends these signals to
the front speakers and the subwoofer. It is recommended for
recording purposes, particularly for recording from a DVD-A or
multi-channel SACD player to a CD-R or another 2-channel record-
ing format.
Parameter Default Setting
CENTER MIX +0dB
SURROUND MIX +0dB
CNTR DLY SAMPLES +0
MASTER LEVEL +0dB
LFE MIX +0.0dB
SUB L/R LVL +0dB
CUSTOM Refer to page 6-37
See "Listening Mode Menu Option and Parameter Descriptions" on page 6-39 for
.
detailed descriptions
Possible Settings
-25 to +5dB
-5 to +5dB
-127 to +127
-5 to +5dB
-20.0 to +0.0dB
OFF, -30 to +12dB
5.1a BYPASS
MODE ADJUST 5.1a BYPASS
• Designed for playback of 5.1-channel analog sources, such as
DVD-A or SACD players.
• Sends the 5.1-channel analog audio input connector directly to
the Main Zone volume control and audio output connectors, as
shown on pages 2-9 and 3-59. These signals receive no internal
processing.
• When both side and rear speakers are present, surround
channel signals are sent in parallel to the side and rear speakers.
To configure a 5-channel speaker setup, set the OUTPUT
LEVELS menu SIDE L/R or REAR L/R parameter to OFF to
deactivate the associated surround speakers.
• Pressing the remote control HOME/MAIN/AGE2/A BYP then
2CH buttons toggles the MAIN ADV menu ANALOG BYPASS
parameter between ON and OFF.
Parameter Default Setting
OUTPUT LEVELS Refer to page 6-37
CUSTOM Refer to page 6-37
Note:
Speaker crossover settings, speaker distances and audio (tone) controls
are not available when the 5.1a BYPASS listening mode is activated.
Mode Adjust
Possible Settings
6-33