Lexicon RV-8 User Manual page 68

Setup
CONFIGURING ADVANCE INPUT SETTINGS
S-VIDEO OSD 4:3
DVD1
SETUP INPUTS MAIN ADVANCED
Controls the appearance of the on-screen display when the display
device is connected to an S-Video output connector. When set to
ON, the display device shows the on-screen display in a 4:3 aspect
ratio, regardless of the incoming signal.
Aspect ratio refers to the ratio between the height and width of the
picture on the display device or to the ratio between the height and
width of the display device. A 4:3 aspect ratio is almost square. A
16:9 aspect ratio, often referred to as "widescreen," is almost twice as
wide as it is high.
When OFF, the display device shows the on-screen display in the
same aspect ratio as the incoming video input signal.
Note:
The on-screen display appears horizontally stretched across the display
device screen when all of the following conditions are present:
• The S-VIDEO OSD 4:3 parameter is OFF.
• An anamorphic video input signal is present.
• A 16:9 display device (widescreen) is connected to an S-Video
output connector.
3-20
(continued)
ON, OFF
S-VIDEO OSD 4-3
COMPONENT OSD
SETUP INPUTS DVD1 MAIN ADVANCED
Controls the appearance of the on-screen display when the display
device is connected to the component video output connector.
When ON, the display device shows the on-screen display as a 480i
video signal on a full blue-screen background. To minimize viewing
distractions, the two-line status does not appear in the on-screen
display. When OFF, the display device does not show the on-screen
display, including the two-line status.
Note:
When the ON-SCREEN DISPLAY menu BACKGROUND parameter is OFF,
the display device using the component video output connector will not
show the on-screen display.
Lexicon
ON, OFF
COMPONENT OSD