Lexicon RV-8 User Manual page 76

8-channel audio and video control center
Hide thumbs Also See for RV-8:
Table of Contents

Advertisement

Setup
THX SPEAKER SETUPS
Selecting THX SETUP opens the THX SPEAKER SETUP screen, which indicates that pressing the
Zone audio output connectors for a THX speaker setup. Use THX-certified speakers in a THX speaker setup.
SETUP
SPEAKER SETUP
INPUTS
SET CROSSOVERS
SPEAKERS
CHECK MICROPHONES
I/O CONFIG
AUTOMATIC
DISPLAYS
MANUAL
VOLUME CONTROLS
TRIGGER
TUNER SETUP
BEFORE CALIBRATING
LOCK OPTIONS
LIVE! CALIBRATION
POWER MANAGEMENT
Selecting THX SETUP opens the THX SPEAKER SETUP screen, which
indicates that pressing the
arrow button will automatically configure
the Main Zone audio output connectors for a THX speaker setup. Use
THX-certified speakers in a THX speaker setup.
When the THX SPEAKER SETUP screen opens:
Press the arrow button to configure the Main Zone audio
output connectors for a THX speaker setup. The THX SETUP
menu will open on the in-screen display.
Press the arrow button to close the message without config-
uring the Main Zone audio output connectors for a THX
speaker setup.
3-28
CROSSOVER SETUP
CUSTOM SETUP
THX SETUP
R
80Hz
SET CROSSOVERS
C
80Hz
M
L
SUB
80Hz
80Hz
THX SPEAKER SETUP
!CAUTION!
PRESSING THE RIGHT
BUTTON WILL
AUTOMATICALLY CHANGE
SR
RR
THE OUTPUTS TO A THX
80Hz
80Hz
SPEAKER
CONFIGURATION
SL
RL
80Hz
80Hz
When a THX speaker setup is selected, the RV-8 applies a THX 80Hz
crossover point with a 12dB-per-octave filter to the Front L/R, Center,
Side L/R and Rear L/R output connectors. The RV-8 applies a THX
80Hz crossover point with a 24dB-per-octave filter to the Subwoofer
output connector.
Notes:
A THX speaker setup is not required to activate THX listening
modes.
In the THX SETUP menu, only the REAR L/R, THX ULTRA2 SUB,
BGC and ASA parameters can be changed.
arrow button will automatically configure the Main
THX SETUP
CROSSOVER SETUP
FRONT L/R*
THX 80 Hz
CUSTOM SETUP
CENTER*
THX 80 Hz
THX SETUP
SIDE L/R*
THX 80 Hz
REAR L/R
THX 80 Hz
SUBWOOFER*
THX 80 Hz
ULTRA2 SUB
OFF
BGC
N/A
ASA
APART
M
* These parameters cannot be
SUB
adjusted.
80Hz
Lexicon
R
SR
RR
80Hz
80Hz
80Hz
C
80Hz
L
SL
RL
80Hz
80Hz
80Hz

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rv-8 - rev 1

Table of Contents