Lexicon RV-8 User Manual page 56

8-channel audio and video control center
Hide thumbs Also See for RV-8:
Table of Contents

Advertisement

Setup
ASSIGNING AUDIO and VIDEO INPUT CONNECTORS
MAIN MENU
SETUP
MODE ADJUST
INPUTS
AUDIO CONTROLS
SPEAKERS
TUNER PRESETS
I/O CONFIG
SETUP
DISPLAYS
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
LIVE! CALIBRATION
POWER MANAGEMENT
ANALOG IN
SETUP
INPUTS
DVD1
ANALOG IN
Opens the ANALOG IN menu, which is used to assign an analog
audio input connector for the selected input. The RV-8 has eight
configurable inputs, each of which can be assigned to any of its eight
analog audio input connectors.
The appearance of the ANALOG IN menu depends on the configu-
ration of the analog audio input connectors.
The ANALOG IN menu (A above) appears when the I/O CONFIG
menu 8 STEREO INPUTS option is selected (see page 3-60).
The ANALOG IN menu (B above) appears when the I/O CONFIG
menu 5 ST. & 5.1 ANLG option is selected (see page 3-61).
The ANALOG IN menu (C above) appears when the I/O
CONFIG menu 2 ST. & (2) 5.1 ANLG option is selected (see
page 3-61).
3-8
(continued)
INPUT SETUP
DVD1 INPUT SETUP
DVD1
NAME
DVD2
DIGITAL IN
SAT
ANALOG IN
VCR
ANLG IN LVL
TV
VIDEO IN
CD
COMPONENT IN
TUNER
2-CH
PHONO
D
5.1a
MIC
MAIN ADVANCED
ZONE2 IN
ZONE2 ADVANCED
ANALOG-1 to 8, 5.1 ANLG (3-5) or (6-8), PHONO, TUNER, NONE, LIVE!
DVD1 ANALOG IN
DVD1
ANALOG-1
COAX-1
ANALOG-2
NONE
ANALOG-3
AUTO
ANALOG-4
S-VIDEO-1
ANALOG-5
1
ANALOG-6
FILM
ANALOG-7
5.1
FILM
ANALOG-8
FILM
PHONO
5.1a
FILM
TUNER
LIVE! MED
NONE
LIVE!
DIGITAL
A
Please note the following:
When no analog audio input connector is assigned, the RV-8
automatically sets the MAIN ADV menu INPUT SELECT
parameter to DIGITAL (see page 3-17).
An analog audio input connector must be assigned when no
digital audio input connector is assigned. Refer to the previous
page for information about assigning a digital audio input
connector.
The PHONO input corresponds to the built-in phono
connector.
The TUNER input corresponds with the internal AM/FM radio
tuner.
LIVE! cannot be selected until LIVE! CALIBRATION is run. When
the ANALOG IN selection is LIVE!, the digital input selection is
disabled for this input until a different analog input is selected.
Lexicon
DVD1 ANALOG IN
DVD1 ANALOG IN
ANALOG-1
ANALOG-1
ANALOG-2
ANALOG-2
ANALOG-3
5.1 ANLG (3-5)
ANALOG-4
5.1 ANLG (6-8)
ANALOG-5
PHONO
5.1 ANLG (6-8)
TUNER
PHONO
NONE
TUNER
LIVE!
NONE
C
LIVE!
B

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rv-8 - rev 1

Table of Contents