Input Select Parameter Settings - Lexicon RV-8 User Manual

RV-8

INPUT SELECT PARAMETER SETTINGS

DIGITAL
The RV-8 sends the assigned digital audio
input connector to the Main Zone audio
output connectors. The RV-8 ignores the
assigned analog audio input connector.
Note the following:
• The digital audio input connectors
are compatible with PCM (44.1, 48,
88.2 and 96kHz), Dolby Digital and
DTS(-ES) sources.
• The digital audio input connectors
are not compatible with MPEG or
MP3 sources. If an incompatible
digital audio source (e.g., MPEG or
MP3) is present, the RV-8 automati-
cally selects the assigned analog
audio input connector.
• The RV-8 automatically sets the
INPUT SELECT parameter to DIGITAL
when the ANALOG IN parameter is
set to NONE.
• If ANALOG IN is set to NONE, the
RV-8 will mute.
• parameter can be
The DIGITAL IN
used to assign a digital audio input
connector for the selected input.
ANALOG
The RV-8 sends the assigned analog audio input
connector to the Main Zone audio output
connectors. The RV-8 ignores the digital audio
input connector.
Note the following:
• The RV-8 automatically sets the INPUT
SELECT parameter to ANALOG when the
DIGITAL IN parameter is set to NONE.
• The ANALOG IN parameter can be used to
assign an analog audio input connector
for the selected input.
AUTO
The RV-8 toggles between sending the assigned
digital and analog audio input connectors to the
Main Zone audio output connectors, based on the
input source that is present.
For example:
• When a 2-channel PCM, Dolby Digital or
DTS(-ES ) source is presen t, th e RV-8
automatically selects the assigned digital
audio input connector.
TM
• When an SACD source is present, the RV-
8 automatically selects the assigned analog
audio input connector.
Note the following:
• The RV-8 automatically sets the INPUT SELECT
parameter to AUTO when both digital and
analog audio input connectors are assigned.
• When no compatible digital source is
present, the RV-8 automatically selects the
assigned analog audio input connector.
• The AUTO setting is recommended for
components that generate both digital and
analog input signals, such as DVD/SACD
players.
Setup
3-19