Preferred Listening Mode Selection; Mode And Buttons; Listening Mode Selection Buttons - Lexicon RV-8 User Manual

8-channel audio and video control center
Hide thumbs Also See for RV-8:
Table of Contents

Advertisement

RV-8

PREFERRED LISTENING MODE SELECTION

The INPUT SETUP menus include four preferred listening mode
selection parameters labeled 2-CH, DOLBY D, DTS(-ES), 5.1a and
MIC. These parameters are used to select a preferred listening mode
for 2-channel, Dolby Digital, DTS(-ES), 5.1a and LIVE! input sources.
The RV-8 automatically activates the selected listening mode
whenever a new input is selected or a new input source is present.
MODE
AND
BUTTONS
The front-panel and remote-control Mode arrow buttons can be
used to audition listening modes with the current Main Zone input
source. Pressing these buttons scrolls up ( ) or down ( ) through
listening modes available for the current Main Zone source.
Listening modes are scrolled in the order that appears in the MODE
ADJUST menu.
For example, if a 2-channel input source is present, press the
arrow buttons to scroll through available 2-channel listening
modes. The selected listening mode appears in the bottom-left
corner of the Main Zone two-line status.
Dynamic Listening Mode Selection
Dynamic listening modes are only available under certain condi-
tions. For example, many of the dynamic modes are only available
when the RV-8 is configured for seven main output channels and
source material with specific encoding is played. All dynamic
listening modes are available through the remote control or front
panel Mode button.
See "Dynamic Listening Modes" on page 3-13 for a complete
listing of dynamic listening modes.

LISTENING MODE SELECTION BUTTONS

The remote control listening mode selection buttons can be used
to activate the Logic 7 Film, Dolby, DTS(-ES), THX, Logic 7 Music,
or Logic 7 TV listening mode that is appropriate for the Main Zone
input source. For instance, if the L7 button is pressed while a
2-channel source is present, the L7 FILM listening mode is
activated. The table below indicates the listening modes associated
with each mode family selection button.
2-Channel
Button
Sources
L7 F
L7 FILM
L7 M
L7 MUSIC
L7 TV
L7 TV
L7 MS
L7 MUSIC
or
SURROUND
DOLBY
DOLBY PLIIx MOV
DTS
DTS NEO:6 CIN
THX
DOLBY PLIIx + THX
* These listening mode names differ depending on the input source, the speaker config-
uration and certain parameter settings. For 5.1 systems with only side or rear speak-
ers (but not both), pressing the
** The "MODE SELECTION NOT AVAILABLE" message appears in the on-screen and
front-panel displays when no listening mode is available for the Main Zone input
source that is present.
*** For ES source.
Mode Adjust
Dolby Digital
DTS(-ES)
Sources
Sources
5.1 L7 FILM
DTS(-ES) L7 FILM
5.1 L7 MUSIC
DTS(-ES) L7 MUSIC
5.1 L7 TV
MODE SELECTION
NOT AVAILABLE**
5.1 L7 MUSIC
DTS(-ES) L7 MUSIC
DD 5.1 PLIIx MOV*
MODE SELECTION
NOT AVAILABLE**
MODE SELECTION
DTS(-ES)
NOT AVAILABLE**
THX UL2CIN
DTS THX
DTS THX UL2 CIN
DTS(-ES) THX***
button loads the DOLBY DIGITAL mode.
5.1a
Sources
5.1a L7 FILM
5.1a L7 MUSIC
N/A
N/A
N/A
N/A
5.1a THX Sur
EX
6-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rv-8 - rev 1

Table of Contents