Lexicon RV-8 User Manual page 96

Setup
PERFORMING AUTOMATIC CALIBRATION
MAIN MENU SETUP
MODE ADJUST INPUTS
AUDIO CONTROLS SPEAKERS
TUNER PRESETS I/O CONFIG
DISPLAYS
SETUP
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
LIVE! CALIBRATION
POWER MANAGEMENT
Follow the procedures in the appropriate table column for the desired type of automatic calibration.
STEP DISTANCES
Select the SPEAKER SETUP menu AUTOMATIC option, as shown in the menu illustration above.
• If a microphone check is successful, the AUTO SPEAKER SETUP menu appears in the on-screen display. Press
the or
this option. Refer to the table on page 3-36 for more information about automatic calibration options.
1
• If a microphone check is unsuccessful, one of the error messages shown to the right appears in the on-screen display, indicat-
ing that a successful microphone check is required before automatic calibration, and also the reason the previous check failed.
If this occurs, go back to "Connecting the Microphones" on page 3-37 and work your way back to this page.
The following AUTO SPEAKER SETUP messages are displayed before automatic calibration begins:
• The !CAUTION! HIGH AUDIO LEVELS message indicates that the RV-8 generates loud calibration noise signals during automatic calibration. If the sig-
nals become too loud, press the
menu.
2
• The countdown display notifies you that automatic calibration will begin in 10 seconds. The primary reason for the 10 second delay is to give you time
to leave the listening space before automatic calibration begins. If you choose to remain in the room, your movements could affect the calibration
results. If you leave the room, you can return in about 10 minutes (the calibration procedure should be completed). Press the
skip the countdown and begin automatic calibration. The RV-8 automatically activates automatic calibration when the countdown ends.
3-48
SPEAKER SETUP
SET CROSSOVERS
CHECK MICROPHONES
AUTOMATIC
MANUAL
SET CROSSOVERS
BEFORE CALIBRATING
arrow button to highlight the automatic calibration option you want. Then press the
arrow button to cancel automatic calibration. Press the
CUSTOM SETUP AUTO SPEAKER SETUP
DISTANCES & LEVELS 40 Hz
DISTANCES 60 Hz
OUTPUT LEVELS 60 Hz
60 Hz
PLACE MICROPHONES 40 Hz
AROUND PREFERRED OFF
LISTENING POSITIONS N/A
APART
DISTANCES & LEVELS
CUSTOM SETUP AUTO SPEAKER SETUP AUTO SPEAKER SETUP
!CAUTION! 40 Hz TEST WILL BEGIN IN
HIGH AUDIO LEVELS 60 Hz
60 Hz
YOU WILL HAVE 10 SEC 60 Hz PRESS TO SKIP
TO LEAVE THE ROOM OR 40 Hz COUNTDOWN
SIT QUIETLY OFF
N/A
PRESS APART TO BEGIN
COUNTDOWN
LEVELS
MIC CHECK REQUIRED
arrow button to select
FOR AUTO CALIBRATION
NO MICROPHONE
DETECTED
arrow button to open the next AUTO SPEAKER SETUP
Lexicon
10
arrow button to