Lexicon RV-8 User Manual page 102

Setup
PERFORMING MANUAL SPEAKER DISTANCE CALIBRATION
SETUP SPEAKERS MANUAL
Selecting the MANUAL SPEAKER SETUP menu SPEAKER DISTANCES option displays the SPEAKER DISTANCES menu, to manually calibrate speaker
distances.
MAIN MENU SETUP
INPUTS
MODE ADJUST
SPEAKERS
AUDIO CONTROLS
I/O CONFIG
TUNER PRESETS
DISPLAYS
SETUP
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
LIVE! CALIBRATION
POWER MANAGEMENT
To manually calibrate speaker distances:
1. Follow the menu path shown above to select MANUAL SPEAKER
SETUP SPEAKER DISTANCES. The SPEAKER DISTANCES menu
shown above will open in the on-screen display.
2. Press the or arrow buttons to highlight the desired speaker
distance parameter. Then, press the
highlighted speaker distance parameter.
3-54
SPEAKER DISTANCES
SPEAKER SETUP
SET CROSSOVERS
CHECK MICROPHONES
AUTOMATIC
MANUAL
SET CROSSOVERS
BEFORE CALIBRATING
arrow button to select the
MANUAL SPEAKER SETUP CUSTOM SETUP SPEAKER DISTANCES
SPEAKER DISTANCES FRONT LEFT
LEVELS CALIBRATION CENTER
FRONT RIGHT
SIDE RIGHT
REAR RIGHT
R SR RR
REAR LEFT
0.0ft 0.0ft
0.0ft
SIDE LEFT
C
SUBWOOFER
0.0ft
UNITS
M
L SL RL
SUB
0.0ft 0.0ft 0.0ft 0.0ft
3. To determine the appropriate speaker distance, measure the
distance between the primary listening position and the front of
the speaker.
For example, when the FRONT LEFT parameter is selected,
measure the distance between the primary listening position
and the front of the front left speaker (connected to the Main
Zone audio output connector labeled Front L).
4. When the speaker distance has been measured, press the
and arrow buttons to set the parameter to the closest available
value.
Lexicon
0.0ft
0.0ft
0.0ft
0.0ft
0.0ft
0.0 to 30.0ft or 12.0m
0.0ft
0.0ft
0.0ft
METERS
FEET
FEET