Lexicon RV-8 User Manual page 98

Setup
PERFORMING AUTOMATIC CALIBRATION
STEP
DISTANCES
AUTO DISTANCES
FRONT LEFT 12.0ft
CENTER 10.5ft
FRONT RIGHT 12.0ft
SIDE RIGHT
REAR RIGHT ERROR
REAR LEFT
SIDE LEFT
SUBWOOFER
If there was a DISTANCES calibration
error, an AUTO DISTANCES menu auto-
matically displays.
• A value indicates that no errors occurred
during the calibration procedure.
5
• An ERROR message indicates that a value
was calculated, but at least one error
occurred during the calibration proce-
dure.
• Press the
light the speaker calibration parameter
you want. Then press the
view more detailed results for the
selected speaker. A message similar to
the one shown above will display.
• Refer to the table on page 3-52 for infor-
mation about all possible speaker calibra-
tion messages.
• This menu is displayed, but not user
accessible during Auto Distance Calibra-
tion or after Auto Calibration.
3-50
(continued)
FRONT LEFT
Refer to the table on page
3-52 for information about
4.5ft
all possible speaker calibra-
tion messages.
6.0ft
4.5ft
N/A
or arrow button to high-
button to
DISTANCES & LEVELS
AUTO SPEAKER SETUP
DISTANCES OK
LEVELS ERROR
AUTO VALUES APPLIED
PRESS TO VIEW
DETAILS
When the RV-8 is finished calibrating
speaker distances and output levels, if there
was a calibration error, the AUTO SPEAKER
SETUP screen is displayed, indicating the
results for each calibration procedure.
• An OK message indicates that no errors
occurred during the calibration proce-
dure.
• An ERROR message indicates that values
were calculated, but at least one error
occurred during calibration.
• Press the or arrow button to high-
light the desired calibration procedure.
DISTANCES displays the AUTO DIS-
TANCES screen shown in the left column
of this table.
LEVELS displays the AUTO LEVELS screen
shown in the right column of this table.
• Press the arrow button to select this
procedure.
• Refer to the instructions in the appropri-
ate column to view more detailed results
for each individual speaker.
• If a speaker is highlighted in either the
Distances or Levels menus, the speaker
name is displayed.
LEVELS
AUTO LEVELS
FRONT LEFT
FRONT LEFT -2.0dB
CENTER ERROR
Refer to the table on page
FRONT RIGHT -2.0dB
3-52 for information about
SIDE RIGHT -4.5dB
all possible speaker calibra-
REAR RIGHT -3.0dB tion messages.
REAR LEFT -3.0dB
SIDE LEFT -4.5dB
SUBWOOFER N/A
If there was a LEVELS calibration error, an
AUTO LEVELS menu automatically dis-
plays.
• A value indicates that no errors occurred
during the calibration procedure.
• An ERROR message indicates that a value
was calculated, but at least one error
occurred during the calibration proce-
dure.
• Press the or arrow button to high-
light the desired speaker calibration
parameter. Then, press the
button to view more detailed results for
the selected speaker. A message similar
to the one shown above will display.
• Refer to the table on page 3-52 for infor-
mation about all possible speaker calibra-
tion messages.
• This menu is displayed, but not user
accessible during Auto Distance Calibra-
tion or after Auto Calibration.
Lexicon
arrow