On-Screen Display Setup - Lexicon RV-8 User Manual

Setup

ON-SCREEN DISPLAY SETUP

SETUP DISPLAYS
ON-SCREEN DISPLAY
Opens the ON-SCREEN DISPLAY menu, which is used to customize the on-screen display.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
Parameter Default Setting Possible Settings
STATUS 2 SECONDS
POSITION TOP
FORMAT NTSC
BACKGROUND ON
3-64
DISPLAY SETUP
SETUP
INPUTS ON-SCREEN DISPLAY
FRONT PANEL DISPLAY
SPEAKERS
A/V SYNC DELAY
I/O CONFIG
CUSTOM NAME
DISPLAYS
EDIT CUSTOM NAME
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
LIVE! CALIBRATION
POWER MANAGEMENT
ALWAYS ON, 2 SECONDS,
ALWAYS OFF
TOP, CENTER, BOTTOM
SECAM, PAL, NTSC
ON, OFF
ON-SCREEN DISPLAY
STATUS 2 SECONDS
POSITION TOP
OFF FORMAT NTSC
OFF BACKGROUND ON
ON
OFF
STATUS
ALWAYS ON, 2 SECONDS, ALWAYS OFF
SETUP DISPLAYS ON-SCREEN DISPLAY
Activates and deactivates the on-screen display sent to the Main Zone
video output connector. When set to ALWAYS ON, the on-screen display
remains on at all times. When set to 2 SECONDS, the on-screen display
appears for 2 seconds whenever the input source changes or the RV-8
receives a command. When set to ALWAYS OFF, the on-screen display
remains off at all times. It will not reappear until the ON-SCREEN
DISPLAY menu STATUS parameter is set to ALWAYS ON or 2 SECONDS.
Note:
When the ON-SCREEN DISPLAY menu STATUS parameter is set to ALWAYS
OFF, the on-screen display immediately disappears. Use the front-panel
display as a guide to reset the parameter to ALWAYS ON or 2 SECONDS.
Lexicon
ALWAYS ON
2 SECONDS
ALWAYS OFF
TOP
CENTER
BOTTOM
SECAM
PAL
NTSC
STATUS