Lexicon RV-8 User Manual page 122

Setup
TUNER SETUP
(continued)
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
AUTOLOAD
TUNER SETUP AUTOLOAD
SETUP
Automatically scans and stores presets for the currently selected
frequency band.
To select the AUTOLOAD option, highlight AUTOLOAD in the TUNER
SETUP menu and press the right ( ) arrow. The message "PRESS
RIGHT TO START AUTOLOAD" appears in the on-screen and front-
panel displays.
• To cancel the AUTOLOAD command, press the left ( ) arrow.
• AUTOLOAD skips presets with previously stored values and uses
the next available preset.
• Once all available stations have been scanned, or if any TUNER
button is pressed (including the remote's buttons), AUTOLOAD
will stop.
• To autoload stations from the other frequency band, select that
band and restart AUTOLOAD.
3-74
SETUP TUNER SETUP
REGION
INPUTS
SCAN SENS
SPEAKERS
AUTOLOAD
I/O CONFIG
CLEAR ALL
DISPLAYS
TUNER PRESETS
VOLUME CONTROLS
DISPLAY
TRIGGER
RADIO TEXT
TUNER SETUP
SCROLL RATE
LOCK OPTIONS
AUTO FREQUENCY
LIVE! CALIBRATION
POWER MANAGEMENT
Note:
Presets are saved when the unit is powered down. Because the
AUTOLOAD function preserves any existing presets, consider using the
CLEAR ALL function before using AUTOLOAD. Note that some channels
may be repeated in the preset section if AUTOLOAD is used more than
once since the last CLEAR ALL.
PRESS RIGHT
USA
TO START AUTOLOAD
LOW
RDS NAME
ON
MEDIUM
ON
Lexicon