Lexicon RV-8 User Manual page 207

RV-8
MAIN MENU SETUP
INPUTS
MODE ADJUST
AUDIO CONTROLS SPEAKERS
TUNER PRESETS I/O CONFIG
SETUP DISPLAYS
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
LIVE! CALIBRATION
POWER MANAGEMENT
CUSTOM SETUP SETTING DISTANCES CUSTOM SETUP SETTING LEVELS
FRONT LEFT 0.0ft FRONT LEFT
CENTER 0.0ft CENTER
FRONT RIGHT 0.0ft FRONT RIGHT
SIDE RIGHT 0.0ft SIDE RIGHT
REAR RIGHT 0.0ft REAR RIGHT
REAR LEFT 0.0ft REAR LEFT
SIDE LEFT 0.0ft SIDE LEFT
SUBWOOFER 0.0ft SUBWOOFER
The AUTO DISTANCES and AUTO LEVELS screens
shown on the right indicate the individual calibra-
tion results for each speaker. Press the
arrow buttons to highlight the desired speaker cali-
bration parameter. Then, press the
ton to view more detailed results for the selected
speaker.
Press the arrow button to return to the AUTO
SPEAKER SETUP results screen shown above (right).
Then, press the arrow button to select the other
calibration procedure or press the
to return to the SPEAKER SETUP menu.
SPEAKER SETUP
SET CROSSOVERS
CHECK MICROPHONES
AUTOMATIC
MANUAL
SET CROSSOVERS
BEFORE CALIBRATING
MIC CHECK REQUIRED
FOR AUTO CALIBRATION
CUSTOM SETUP AUTO SPEAKER SETUP
+0.0dB
DISTANCES
+0.0dB
LEVELS
+0.0dB
+0.0dB
AUTO VALUES APPLIED
+0.0dB
PRESS TO VIEW
+0.0dB
DETAILS
+0.0dB
+0.0dB
LEVELS
OK
DISTANCES
OK
AUTO LEVELS
FRONT LEFT
and
CENTER
FRONT RIGHT
arrow but-
SIDE RIGHT
REAR RIGHT
REAR LEFT
SIDE LEFT
SUBWOOFER
(SPEAKER)
OK
arrow button
AUTO SPEAKER SETUP
DISTANCES & LEVELS
DISTANCES
OUTPUT LEVELS
PLACE MICROPHONES
AROUND PREFERRED
LISTENING POSITIONS
or CUSTOM SETUP AUTO SPEAKER SETUP
OK DISTANCES ERROR
OK LEVELS ERROR
AUTO VALUES APPLIED
PRESS TO VIEW
DETAILS
(SPEAKER)
SPKR OUTPUT TOO HIGH
ERROR
+0.0dB
(SPEAKER)
+0.0dB
SPKR OUTPUT TOO LOW
+0.0dB
+0.0dB
+0.0dB
+0.0dB
+0.0dB
CUSTOM SETUP AUTO SPEAKER SETUP AUTO SPEAKER SETUP
!CAUTION! 40 Hz TEST WILL BEGIN IN
HIGH AUDIO LEVELS 60 Hz
60 Hz
YOU WILL HAVE 10 SEC 60 Hz PRESS
TO LEAVE THE ROOM OR 40 Hz COUNTDOWN
SIT QUIETLY OFF
N/A
PRESS APART TO BEGIN
COUNTDOWN
When the RV-8 is finished calibrating speaker dis-
tances and output levels, the AUTO SPEAKER
SETUP results screen shown at the left will open in
the on-screen display, indicating the results for
each calibration procedure. If there is an error,
press the or arrow button to highlight the
desired calibration procedure. Then, press the
arrow button to select this procedure. Selecting
DISTANCES opens the AUTO DISTANCES screen
shown below. Selecting the LEVELS option opens
the AUTO LEVELS screen shown below.
AUTO DISTANCES
(SPEAKER)
SPEAKER OUT OF PHASE
FRONT LEFT ERROR
CENTER 0.0ft
(SPEAKER)
FRONT RIGHT 0.0ft
SIGNAL TOO LOW
SIDE RIGHT 0.0ft
REAR RIGHT 0.0ft
(SPEAKER)
REAR LEFT 0.0ft
UNABLE TO CALCULATE
SIDE LEFT 0.0ft
SUBWOOFER 0.0ft
(SPEAKER)
MAY NOT BE ACCURATE
(SPEAKER)
OK
Appendix B
10
TO SKIP
B-7