Starting Up For The Fi Rst Time - Kaco Powador 2002 Operating Instructions Manual

Configuration and Operation
Selecting menu level "3" (service technician)
↻ The inverter is operating.
↻ The LCD is showing the unit name.
EN EN
 Press key "2" for 15 seconds.
» The LCD is showing the country-specifi c parameters.
 Press key "1" repeatedly or press and hold.
» The display runs through menu level "3".
 To return to menu level "1", press keys "1" and "2" simultaneously or wait for one minute without
pressing a key.
Entering password or unlock code
 Key "1" selection of items (1-4).
↻ The LCD shows the selected digits by underlining them.
 Press key "2" to set the value. (0-9, A-F).
↻ The LCD shows the set digits or letters.
 Press "1" to check password.
↻ If the password is correct, the unlocked menu option is displayed.
Saving changed settings
 Press keys "1" and "2" simultaneously to save settings or wait one minute after setting.
» The LCD jumps back to menu level "1".
8.2

Starting up for the fi rst time

When started for the fi rst time, the inverter displays the confi guration assistant. It takes you through the settings
necessary for the initial start-up.
NOTE
After confi guration is completed, the confi guration assistant does not appear again when the
inverter is restarted. You can then change the country setting only in the password-protected param-
eter menu.
NOTE
The sequence of the settings required for initial commissioning is preset in the confi guration assis-
tant.
Initial confi guration
↻ You are in the fi rst start-up.
 Select the menu language.
 Select the country of operation with grid type.
 Press key 1 and confi rm with "Yes" that you want to permanently save the country set.
» You have completed the initial confi guration. The inverter begins to operate.
Page 32 Operating Instructions for Powador 2002-6002_EN