Table of Contents
Advertisement
Conf ig urati on an d O pe rat i on
8.2
Starting up for the first time
When started for the first time, the inverter displays the configuration assistant. It takes you through the settings
necessary for the initial start-up.
NOTE
After configuration is completed, the configuration assistant does not appear again when the
inverter is restarted. You can then change the country setting only in the password-protected
parameter menu. The other settings can still be changed in the Settings menu.
NOTE
The sequence of the settings required for initial commissioning is preset in the configuration
assistant.
Initial configuration
" In order to select a setting, press the up and down buttons.
" To select the next menu item, press the OK button.
" To return to the most recently selected menu item, press the ESC button.
" Set the required settings.
Press the OK button in the last menu item.
»
You have completed the initial configuration. The inverter begins to operate.
8.3
Menu structure
8.3.1
Display on the LCD
1
3
Figure 18: Main menu
Key
1
Selected menu item
2
Name of the active menu level
Page 32
2
4
3
Menu items of the active menu level
4
Menu items of the next lower menu level
Operating Instructions Powador 30.0-72.0 TL3_EN
Hide quick links:
Advertisement
Table of Contents
