3 Inverter Parameters Settings
3.1 Connect to Wi-Fi stick
3.1.1 Connect Wi-Fi stick directly through the Wi-Fi stick's hotspot
If you haven't configurated the WLAN network to the Wi-Fi stick yet, you can find the Wi-Fi stick's SSID in the WLAN
network list of your smart device. If you have configurated the WLAN network to the Wi-Fi stick, but the blue LED light of
the Wi-Fi stick doesn't work, you can find the Wi-Fi stick's SSID also in the WLAN list of your smart device. The password of
the Wi-Fi stick's hotspot is the resist code on the Wi-Fi stick.
Connect Wi-Fi stick directly through the Wi-Fi stick's hotspot.
1
Open the app and click on "LOCAL MODE".
2 Click
the "Scan device"
3 Select inverter from list
» Proceed with inverter parameter settings.
KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2
Fig. 10: Changing Wi-Fi network
button.
Page 4