Menu Structure - Kaco Powador 2002 Operating Instructions Manual

Configuration and Operation
8.3

Menu structure

Icons used:
Menu level (1, 2, 3)
1 1 2 3
Display menu
Option menu
Password protected menu (password can be requested from KACO Service)
Enter the four-digit password using key "2". The password is unit-specifi c.
Coun- Menu
try-spec. level
Settings
1 2
3
1 1 2 3
1 1 2 3
All countries
1 1 2
3
1 1 2 3
DE-NSP
BE
1 1 2 3
IT-CEI021
1 1 2 3
All countries
1 1 2 3
DE-NSP
DE-MSP
1 2 2 3
DE_VDN
1 1 2 3
IT-CEI021
1 1 2
3
All countries
Operating Instructions for Powador 2002-6002_EN
EN
DE-NSP
Display/
setting
Display
"Display" menu
Unit name
Generator
parameters
Grid parameters
Mode
Additional modes:
External limitation
(power control)
Status of the Pow-
ador-priwatt
priwatt time
remain.
priwatt power
remain.
SPI status
Ramp-up
limitation
Submenu available
Country-specifi c setting
Country and grid type-specifi c setting
Action in this menu/meaning
 Press keys "1" or "2".
 Press key "1" to run through the following menu level
"1".
Displays the unit name of the inverter.
Displays the current voltage and current of the PV array
that is connected to the inverter.
Shows the current grid parameters that the unit is feeding
into the grid. (Nominal power [W], nominal voltage [V],
grid frequency [Hz] and current [A]).
Shows the currently selected reactive power mode.
Following modes:
- cos phi (P) : specifi c characteristic
- cos phi (P) : standard characteristic
- cos phi : x.xxx u (under excited) / o (over excited) (const)
- Q: xx.x % u (under excited) / o (over excited) (const)
- Q=f(U) standard characteristic
- Q=f(U) specifi c characteristic with 5 nodes
- Q=f(U) specifi c characteristic with two-state controller
Menu option is displayed with external active power lim-
itation.
Displays the power control in % steps
(0%, 30%, 60%). In accordance with the requirements of
the German renewable energy act (EEG)
Menu item is displayed with active Powador priwatt func-
tion and potential-free contact switched.
Displays the active status.
Menu option is displayed with active Powador-priwatt
function and potential-free contact switched.
Shows the remaining runtime in hours and minutes alter-
nating.
Displays the power available over the threshold range.
Status display of the specifi c "System Protection Interface"
(Remote tripping/External signal/local control)
Menu option is displayed with active ramp limitation.
(power ramp-up)
EN
Page 33