Kaco Powador 2002 Operating Instructions Manual page 40

Configuration and Operation
Authorised electrician
Coun-
try-spec.
Settings
EN EN
IT-CEI021
IT-CEI021
All countries
Page 40
Menu Display/
level setting
Q=f(U) 5
1 2
3 3
nodes
Q=f(U) 2-point
1 2 3 3
controller
Activate
1 2 3 3
SPI mode
Set default
1 2 3 3
parameters
Action in this menu/meaning
Select the preset control procedure.
 The parameters of the selected procedure can be
changed by selecting "Yes".
 Specify gradient K. (Default value: 01000/1000)
 Specify change time. (ms)
 U_Lock In and U_Lock Out power range set as ‰ of
rated power, in which the network support process is
active.
NOTE: The nodes cannot be edited.
 Provides the option of activating or confi guring the
specifi c "System Protection Interface" for Italian.
(Additional PCB required!)
On activation the specifi ed parameters for the selected
country are reset to the default values.
 Reset default parameters.
NOTE: When password protection is activated, only the
grid operator can make a change.
Operating Instructions for Powador 2002-6002_EN