Maintenance/Troubleshooting
9
Maintenance/Troubleshooting
9.1
Visual inspection
Inspect the inverter and the cables for visible damage and note the operating status display of the inverter. In case
of damage, notify your installer. Repairs may only be carried out by authorised electricians.
NOTE
The inverter should be checked for proper operation by a qualifi ed electrician at regular intervals.
9.2
External cleaning
DANGER
Lethal voltages in the inverter
Serious injuries or death may occur if moisture gets into the inverter.
›
Only use completely dry objects to clean the inverter.
›
Only the exterior of the inverter should be cleaned.
Cleaning the inverter
Do not use compressed air.
Use a vacuum cleaner or a soft brush to remove dust from the bottom fan covers and from the top of the
inverter on a regular basis.
Remove dust from the ventilation inlets if necessary.
9.2.1
Cleaning the fan
NOTE
If the fan is only covered with loose dust, it can be cleaned with the help of a vacuum cleaner or a
soft brush.
If the fan is very dirty, or if it is defective, it can be removed.
DC
Figure 30: Plug for fan
Operating Instructions for Powador 2002-6002_EN
Figure 31: Fan cover
EN
Page 41