Shutdown/Disassembly; Shutting Down The Inverter; Uninstalling The Inverter; Dismantling The Inverter - Kaco Powador 2002 Operating Instructions Manual

Shutdown/Disassembly

11 Shutdown/Disassembly
11.1

Shutting down the inverter

EN EN
Lethal voltages are still present in the terminals and cables of the inverter even after the
inverter has been switched off and disconnected.
Severe injuries or death may occur if the cables and terminals in the inverter are touched.
›
Destruction of the DC plug
DC plugs can be destroyed by arcing if disconnected while still live.
›
Shutdown sequence
1. Switch off the grid voltage by turning off the external circuit breakers.
2. Disconnect the PV generator using the DC isolator switches.
DANGER! The DC cables are still live.
 Ensure that there is no voltage present on the grid connection terminals.
11.2

Uninstalling the inverter

↻ Shut down the inverter.
1. Unscrew the two Philips screws on the right-hand side of the housing.
2. Detach DC connection plug.
3. Open the housing door.
4. Remove the interface cable.
5. Detach AC connection cables for the connection terminals.
6. Open the cable fi ttings.
7. Pull out the cables.
» The uninstallation of the inverter is complete. Continue with the disassembly.
11.3

Dismantling the inverter

↻ Shut down the inverter.
↻ Uninstall the inverter.
1. Remove the inverter fastening.
2. Securely pack up the inverter if it is to be used later or
dispose of the inverter in line with regulations.
12

Disposal

For the most part, both the inverter and the corresponding transport packaging are made from recyclable raw
materials.
Do not dispose of faulty inverters or accessories together with household waste. Ensure that the old unit and any
accessories are disposed of in a proper manner.
12.1

Packaging

Ensure that the transport packaging is disposed of properly.
Page 50
DANGER
After shutdown, wait at least 30 minutes before working on the inverter.
DANGER
It is absolutely necessary that the shutdown sequence is carried out in the correct order.
Operating Instructions for Powador 2002-6002_EN