Kaco Powador 2002 Operating Instructions Manual page 17

Mounting the inverter
Authorised electrician
Figure 9: Instructions for wall mounting
Fasten wall holder to mounting location
5. Mark the positions of the drill holes using the cut-outs in the wall holder.
NOTE: The minimum clearances between two inverters, or the inverter and the ceiling/fl oor have already been
taken into account in the diagram (see Figure 10).
6. Fix wall holder to the wall with the mounting fi xtures.
Make sure that the wall holder is oriented correctly.
5
4
B
C
A
A
B
C
Figure 11: Minimum distances of inverter
Key
A • horizontal distance between the two inverters /
inverter and the wall
• Distance in front
Operating Instructions for Powador 2002-6002_EN
A
Safety catch
(open)
405
1386
172
1120
Figure 10: Drill stencil for wall mounting with minimum
clearances (in mm)
1
2
3
Safety catch
(closed)
25 cm
565
328
Page 17
EN