Table of Contents
Advertisement
C onfig ura tion an d O pe rat i on
8.2
Starting up for the fi rst time
When started for the fi rst time, the inverter displays the confi guration assistant. It takes you through the settings
necessary for the initial start-up.
NOTE
After confi guration is completed, the confi guration assistant does not appear again when the
inverter is restarted. You can then change the country setting only in the password-protected
parameter menu. The other settings can still be changed in the Settings menu.
NOTE
The sequence of the settings required for initial start-up is preset in the confi guration assistant.
Initial confi guration
In order to select a setting, press the up and down buttons.
To select the next menu item, press the OK button.
To return to the most recently selected menu item, press the ESC button.
Set the required settings.
Press the OK button in the last menu item.
»
You have completed the initial confi guration. The inverter begins to operate.
8.3
Menu structure
8.3.1
Display on the LCD
1
3
Figure 17: Main menu
Key
1
Display of the menu level (0, 1, 2, 3)
2
Designation of the active menu
Page 34
2
4
3
Active menu (example: main menu)
4
Menu items of the next lower menu level
Operating Instructions Powador 30.0-39.0 TL3_EN
Advertisement
Table of Contents
