Table of Contents
Advertisement
Installing the inverter
7.6
Starting up the inverter
DANGER
Lethal voltages are still present in the terminals and cables of the inverter even after the inverter
has been switched off and disconnected.
Severe injuries or death may occur if the cables and terminals in the inverter are touched.
Only appropriately qualifi ed and authorised electricians may start up the inverter.
7.6.1
Switching on the inverter
↻ The inverter has been mounted and electrically installed.
↻ The PV generator supplies a voltage above the confi gured start voltage.
1.
Connect the grid voltage using the external circuit breakers.
2. Connect the PV generator using DC isolator switch (OFF → ON).
»
The inverter begins to operate.
»
During the initial start-up: Follow the instructions of the New Connection Wizard.
Page 26
Installation Instructions KACO
blueplanet
32.0 TL3 / 40.0 TL3 / 50.0 TL3
Advertisement
Table of Contents
