Rj45 Lan Ports; Usb Ports - DFI ST101-CR User Manual

RJ45 LAN Ports

LAN 1 LAN 2
Features
• Realtek 8111DL PCI Express Gigabit LAN controller
The LAN ports allow the system board to connect to a local area network by means of a
network hub.
BIOS Setting
Configure the onboard LAN in the Chipset menu ("South Bridge Configuration" submenu) of
the BIOS. Refer to chapter 3 for more information.
Driver Installation
Install the LAN drivers. Refer to chapter 8 for more information.
Chapter 5 Ports and Connectors
Chapter 5

USB Ports

USB 3.0
USB 1
USB 0
USB 3.0
USB 2
USB 3
USB allows data exchange between your computer and a wide range of simultaneously acces-
sible external Plug and Play peripherals.
The system board is equipped with four onboard USB 3.0/2.0/1.1 ports (USB 0-3). The two
10-pin connectors allow you to connect 4 additional USB 2.0/1.1 ports (USB 4-7).
BIOS Setting
Configure the onboard USB in the Advanced menu ("USB Configuration" submenu) of the
BIOS. Refer to chapter 3 for more information.
Driver Installation
You may need to install the proper drivers in your operating system to use the USB device.
Refer to your operating system's manual or documentation for more information.
24
USB 2.0
USB 6-7
USB 4-5
1
9
2
10
www.dfi.com