DFI ST101-CR User Manual page 14

7. Connect one end to the SATA data connector on the SATA drive and the other end to the SATA
connector on the system board.
SATA data cable
8. Connect the SATA data cable and SATA power cable (from the system board) to their respective
connectors at the rear of the SATA drive.
SATA data cable
SATA power cable
Chapter 3 Installing Devices
Chapter 3
9. Turn the drive bay bracket to the top side. Insert the other SATA data and power cable for
DVD-ROM through the bracket's hole, up to the top side of the bracket.
Cables for DVD-ROM
10. Connect the cable for DVD-ROM to the SATA data and power connectors at the rear of the
optical drive.
14
www.dfi.com