Rj45 Lan Ports; Usb Ports - DFI WM343-SD330 User Manual

RJ45 LAN Ports

Features
• LAN1: Intel ® I219LM Gigabit Ethernet controller with iAMT11.0. (Note that SKUs with the
Intel H110 chipset or the Intel Core™ i3, Celeron
® ®
port iAMT.)
• LAN2: Intel I210AT PCI Express Gigabit Ethernet controller
®
The LAN ports allow the system board to connect to a local area network with a network hub.
BIOS Setting
Configure the onboard LAN ports in the Advanced menu ("ACPI Configuration" submenu) of
the BIOS. Refer to Chapter 7 for more information.
Driver Installation
Install the LAN drivers. Refer to Chapter 8 for more information.
Chapter 5 Ports and Connectors
Chapter 5
LAN 1 LAN 2
and Pentium processors do not sup-
® ®

USB Ports

USB allows data exchange between your computer and a wide range of simultaneously acces-
sible external Plug and Play peripherals.
In addition to the external USB ports, the system board is equipped with onboard USB 3.0 and
2.0 pin headers. Refer to "I/O Connectors" in this chapter for more information.
Wake-On-USB Keyboard/Mouse
The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or USB mouse
to wake up a system from the S3 (STR - Suspend To RAM) state. To use this function, make
sure that that the +5V_standby power source of your power supply must support ≥1.5A for
2 USB ports. For 3 or more USB ports, the +5V_standby power source of your power supply
must support ≥2A.
BIOS Setting
Configure these onboard USB devices in the Advanced menu ("USB Configuration" submenu)
of the BIOS. Refer to Chapter 7 for more information.
Driver Installation
You may need to install the proper drivers in your operating system to use USB devices. Refer
to Chapter 8 and your operating system's manual or documentation for more information.
31
USB 3.0
USB 3.0
USB 4
USB 2
USB 1 USB 3
www.dfi.com