Rj45 Lan Ports; Usb Ports - DFI WM343-KD330 User Manual

RJ45 LAN Ports

Features
• LAN 1: Intel I219LM Gigabit Ethernet controller with iAMT11.0. (Note that Intel
®
i3, Celeron and Pentium processors and H110 chipset do not support iAMT.)
® ®
or
• LAN 1: Intel I219V for WM343-KD330 (with the H110 chipset)
®
• LAN 2: Intel I211AT PCI Express Gigabit Ethernet controller
®
®
• LAN 3, LAN4: Intel I211AT PCI Express Gigabit Ethernet controller for WM343-KD331
(KD331-C236 and KD331-Q170) only
The LAN ports allow the system board to connect to a local area network with a network hub.
BIOS Setting
Configure the onboard LAN ports in the Advanced menu ("ACPI Configuration" submenu) of
the BIOS. Refer to Chapter 7 for more information.
Driver Installation
Install the LAN drivers. Refer to Chapter 8 for more information.
Chapter 5 Ports and Connectors
Chapter 5
LAN 2
LAN 1
LAN 4
LAN 3
Core™
®

USB Ports

USB 2.0
USB 6
USB 5
USB allows data exchange between your computer and a wide range of simultaneously acces-
sible external Plug and Play peripherals.
In addition to the external USB ports, the system board is equipped with onboard USB 3.0 and
2.0 pin headers. Refer to "I/O Connectors" in this chapter for more information.
BIOS Setting
Configure these onboard USB devices in the Advanced menu ("USB Configuration" submenu)
of the BIOS. Refer to Chapter 7 for more information.
Driver Installation
You may need to install the proper drivers in your operating system to use USB devices. Refer
to Chapter 8 and your operating system's manual or documentation for more information.
29
USB 3.0 USB 3.0
USB 2 USB 4
USB 1 USB 3
www.dfi.com