Rear Panel I/O Ports; Dc-In - DFI ST101-CR User Manual

Rear Panel I/O Ports

LAN 1
USB 2.0 DVI-I
COM 1
HDMI
The rear panel I/O ports consist of the following:
• 1 DC-in
• 2 LAN ports
• 2 USB 2.0 ports
• 4 USB 3.0 ports
• 1 DVI-I port
• 1 HDMI port
• 2 RS232/422/485 COM ports (1 optional)
• 1 Line-in/Surround jack
• 1 Line-out jack
• 1 Mic-in/Center+Subwoofer jack
Chapter 5 Ports and Connectors
Mic-in/Center+Subwoofer
LAN 2
COM 2
(optional)
Line-in/
Surround
USB 3.0

DC-in

Line-out
Chapter 5
DC-in
This jack provides maximum of 60W power and is considered a low power solution. Connect
a DC power cord to this jack. Use a power adapter with 12V DC output voltage. Using a volt-
age higher than the recommended one may fail to boot the system or cause damage to the
system board.
22
www.dfi.com